Wood Prime Floor Sealer (4 Litres)

A wood floor sanding sealer specially formulated to optimise adhesion and protect against tannin bleed.

FEATURES

• Provides a durable, hard seal
• Protects against tannin bleed
• High clarity, non-yellowing
• Outstanding results when used in conjunction with Woodstar Wood Floor Coating

RECOMMENDED FLOOR SURFACES

All commercial wood floors.

Directions for use: INITIAL APPLICATION

1. Dust mop the floor using an untreated dust mop.
2. Vacuum the floor to remove excess dirt and dust.
3. Tack the floor with water or odourless mineral spirits using dust mop frame and turkish towels. Wring out towels and place on the floor. Place dust mop frame on top of towels and overlap towels over frame. Multiple towels are required for this job. When tacking, overlap each lane.
4. Apply two coats of Pioneer Eclipse WOODPRIME Wood Floor Sanding Sealer with T-Bar Applicator. Allow 1-2 hours between coats.
5. Lightly sand after each coat of sealer using a 175 rpm floor machine and wood floor screens (180 grit recommended) or maroon floor pad.
6. Dust mop the floor using an untreated dust mop, and vacuum the floor to remove excess dust.
7. Tack the floor again using turkish towels immersed in water from clean mop bucket. Wring out towels and place on the floor. Place dust mop frame on top of towels and overlap towels over frame. Multiple towels are required for this job. When tacking, overlap each lane.
8. Apply 2 coats of WOODSTAR Wood Finish. Let dry for 1-2 hours between coats. Floor will be fully cured in 3 days at normal temperature and humidity.
9. After the floor has cured completely, burnish to a wet-look shine using an Pioneer Eclipse UHS burnisher with a Blue Blend Pad.

NOTE: To prevent contamination do not pour unused product from bucket into original container.